Knob-and-Tube Replacement Before Attic Insulation in Everett

Typical cost in Everett

  • Electrician's attic wiring check with written survey$250 – $700+
  • Replace the old circuits running through the attic, one-story house$3,500 – $9,000+
  • Whole house up to about 1,500 sq ft, open attic with a crawlspace or unfinished basement$10,000 – $22,000+

Old knob-and-tube in the attic can hold up an insulation job. We check that wiring before the insulation goes in, and replace what needs replacing while the attic is still open to work in. Washington has a rule for insulating around knob-and-tube, so what happens next depends on the condition of the circuits and the insulation you plan.

Our attic work covers Everett, Mukilteo, Marysville, Mill Creek and Snohomish. Send the property address and we will check that it is in our area.

Tell us about your project

Empty room with plaster walls, a wood floor, folded drop cloths, and a closed attic hatch

Electrical planning before attic insulation

Old attic timbers with cloth-covered wires running on white porcelain knobs

Finding the live wiring where insulation will go

Old knobs and loose lengths of wire in an attic do not show which circuits are still live. We trace and test the wiring where the insulation will go and tell you what has to be done first. Send us your insulation contractor’s proposal with the material and the area, so we look at the right part of the attic.

Replacement while attic access is available

When the old wiring has to go, we list the circuits we replace and how we reach each connection. The open attic gives us a way in to some runs, but the wiring can carry on down into walls and other rooms. We name where we will open walls, which old circuits we disconnect and what old wire we pull out. The new wiring and its inspection come before any insulation covers the places we still need to reach.

Old ivory outlet pulled from a metal box in a plaster wall, with cloth-covered cable entering the box

When old wiring can stay under insulation

Washington allows loose or rolled insulation around existing knob-and-tube only when the rule’s conditions are met. They include a survey and written certification from a properly licensed contractor, plus other conditions on the wiring and the insulation. Foam is not allowed with knob-and-tube. We compare your attic with each condition and settle with the inspecting authority whether the plan meets the rule.

Wiring check before the insulation goes in

We keep our work in step with your insulation contractor’s. They need to know which areas are ready, and we need to know their material and where it goes. Do not book the insulation until the wiring check is done; the wiring may pass, or it may need replacing. We note what we replace and any old wiring left in place.

We find out who issues the permit for the property itself; it is not always the city in your mailing address. Attic floor size is a poor guide to our price, which follows the circuits we replace, the routes they take, how we reach them and the patching afterward. The insulation itself is priced by your insulation contractor.

Get a quote for your knob-and-tube replacement before attic insulation project

Say what insulation is planned and where, and add the insulation proposal if you have one, along with any old electrical records. You can send it all through our quote form. Or call (425) 645-4346.

Get a quote for your project

Call (425) 645-4346